We are having the same problem and Was wondering if problem got resolved
We had one of our falcons F16 V3 which has been running fine for several weeks
suddenly dropped out yesterday. The ethernet port lights go on when plugged in and so
this am we decided to test things and it booted it up and...
Ryan Cook suggested a few modifications but also thought a software issue with xlights was a possibility
we reloaded from our old laptop the network set up from 2015 and input our controllers one at a time and things are working
fine so maybe a glitch in our network file in the system we had...
well another head scratchier we couldn't get the unit to even test through the test mode
changed things back still nothing
switched it out with a spare and spare does nothing
through sandevice page we can test all four of them just fine
We are adding 4 pixel arch's to our display we hope........ but running into a problem getting the E6804 and Arch's to run through a sequence. The controller test fine through the test mode in xlights but when we try running the controller through the sequence we have no output. We tested each...
Had a chance to play with xlights and Thanks for the advise we will definitely try and learn the software
next few weeks to months
Hope all have a great holiday and new year
I apologize now for asking but........
I am converting slowly to RGB lights we built a 16 strand 50 pixel 180 degree tree last year and was
so happy with the effects xlights gave us I want to change our arch's, spiral mega tree and our mini trees to RGB lights next year...
However I would like...
Well it turned out to be the LOR software we had upgraded to S4 while in the process of trying all the
different fixes. When nothing worked we deleted LOR software from the laptop and then reinstalled everything
and now everything works.........Not sure this is a good thing its pretty crazy...
The control lights stay's on and the comm listener is connected.
We are going to try and redo our test dmx set up in LOR and connect the E682 direct when we get home from work
Thanks
Dennis
First thanks for the help
We have tested both of the E682 boards directly connecting thru the Ethernet and pixels work fine.....
Jim and Sandevice also pointed us to another program for testing and everything is ok.
My son and I built some channels in the LOR as dmx channels assigning them...
So we are new to the pixel world and seem to have hit a wall. Hoping someone can help us break through
We would like to run Sandevice E682 to 16 strings of 50 pixels ws2811 we use LOR now and have tried many different setups with no success.
We have a E1.31 to DMX bridge as well as the...
Hi to all
From Pacifica, CA USA
everyone may ask where is Pacifica
Well its about 15 miles south of San Francisco
and on the coast.
Happy Holidays
Dennis