Falcon F16V2R

[markk200]

hi everyone my falcon f16v2r display not working it getting very hot as the circuit board lights coming on but no display what i cant do noting my sequence was ready and when i power on the display came on and went off automically what could be the problem thanks.

 

[Indigogyre]

Check all your power connections, make sure none of the wires went bad and everything is still properly connected. I would disconnect all the ports and turn it on to see if it does the same thing. I would then remove power from one side and test it. Minimize everything for testing and test one thing at a time. Check for possible rust or corrosion on the solder joints.

 

[Iain]

Definitely disconnect everything, check the power supplies are still outputting the right voltage. Also check the 5v/12v jumper is in place.

 

[markk200]

hi i removed the display out of the board ordered the new one but the board is working perfectely.