After making some modifications to my mega tree this year I needed to extend the pole a little.
So after searching through the scrap, I found a piece of steel that with a bit of persuading would fit inside the top of the old pole and then I welded it in for good measure.
I undercoated then painted and have just now sat it into the spigot that is concreted in the ground.
One job ticked off...
So then I measured it
To the top of the star on top it will be 5.8m from ground height (19 feet)
As I sit about 800mm above the road height that thing is going to be able to be seen from half way around the block
So I ask...
How tall are your mega trees?
So after searching through the scrap, I found a piece of steel that with a bit of persuading would fit inside the top of the old pole and then I welded it in for good measure.
I undercoated then painted and have just now sat it into the spigot that is concreted in the ground.
One job ticked off...
So then I measured it
To the top of the star on top it will be 5.8m from ground height (19 feet)
As I sit about 800mm above the road height that thing is going to be able to be seen from half way around the block
So I ask...
How tall are your mega trees?